Toyota — Body

3, .\ ENGINE HOOD LOCK CABLE Disconnection \\ REMOVAL 1. Open the engine hood. 2. Remove the toe board. 3. Remove the engine hood lock cable. (1 Loosen the cable lock nut and disconnect the end of the cable from the hood lock hook on the lever side. (2) Disconnect the end of the cable from the stopper plate on the engine hood side. INSTALLATION The installation procedure is the reverse of the removal procedure. Note: Apply grease to the lever pin and the stopper plate portion in sliding contact with the hood. Tighten the bolt which fastens hood lock cable and park - ing brake cable clamp together. Action when the engine hood cannot be opened.

When the engine hood cannot be opened because of discon - nection of the engine hood lock cable or other reason, release the stopper by inserting a thin strip as illustrated.