Toyota — Body

BALANCE WEIGHT REMOVAL. INSTALLATION 1. Remove the radiator cover. 2. Hook the wire rope in the hoisting hole provided on top of the weight. Caution: Use a wire rope having sufficient strength. (See page 0 - 1 3 for the weight of the balance weight and page 0 - 14 for the safe load for each wire rope.) 3. Remove the weight set bolts and remove the weight. 4. The installation procedure is the reverse of the removal procedure. HOISTING THE VEHICLE When hoisting the vehicle sling the wire rope on the mast hook and the rear sides of headguard. Caution: Use wire ropes having sufficient strength. The holes on the weight are solely for hoisting the weight for removal and installation.

Do not use them for hoisting the vehicle.