Toyota — Mast

MAST DISASSEMBLY - INSPECTION - REASSEMBLY 7 Disassembly Procedure 1 Remove the hose cover. 2 Disconnect the overflow hose and high pressure hose. 3 Remove the cylinder rod end set bolt and disconnect the rod end. [Point I] 4 Remove the cylinder support. [Point 21 5 Remove the cylinder bottom set bolts and remove the lift cylinder. 6 Slide the inner mast in the lowering direction and remove the lift rollers. 7 Remove the mast strip. [Point 31 8 Remove the outer mast. Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure.