Point Operations [Point 1 I Disassembly: Shim adjustment has been made at the lift cylinder rod end for prevention of cylinder uneven motion between the left and right sides. Take a note on which side the shim adjustment is made and the number of shims used. / [Point 21 \ Disassembly: Take a note on the number of cylinder sup - port shims used. Reassembly: When the mast or cylinder is replaced, make shim adjustment at the cylinder support. With the cylinder rod end inserted t o the in - ner mast, eliminate the clearance between the cylinder support and outer mast by in - serting shims. The shim thickness should be slightly thicker. [Point 31