Toyota — Mast

- Ah This roller A / Bring into contact Outer mast Inner mast 2. Outer mast roller clearance adjustment (1 ) Measure the clearance with the mast overlap at near 450 mm (17.72 in). (2) Shift the inner mast to one side to bring the roller into contact with the outer mast, and adjust the clearance between the roller side face and mast at the closest position on the opposite side to the fol - lowing value by inserting the outer mast roller shim: Standard clearance B = (0 - 0.031 in) Shim thickness: 0.5 and 0 - 0.8 mm .O mm (0.020 and 0.039 in) I (3) Distribute the shim thickness equally to the left and right sides.

(See the " mast roller removal.installa- tion" section for the shim replacement procedure.) (4) After the adjustment, check that the inner mast moves smoothly in the outer mast.