MAST ADJUSTMENT (FSV MAST) Mast Lift Roller Adjustment (FSV) Outer mast lnner mast This ioller 1 . lnner mast roller and middle mast lower roller clearance adjustment (1 7.72 in). (2) Shift the inner mast to one side to bring the roller into contact with the outer mast and the mid - dle mast, and adjust the clearance between the roller side face and mast at the closest position on the opposite side to the following value by inserting the inner mast roller shim and middle mast lower roller shim, respectively. (1) Measure the clearance with the mast overlap at near 450 m m (0 - 0.031 in) Shim thickness:
0.5 and 1.0 mm 0 - 0.8 mm Standard clearance A = ( 0.020 and 0.039 in) (3) Distribute the shim thickness equally to the left and right rollers. (4) After the adjustment, check that the inner mast moves smoothly in the middle mast, and the middle mast moves smoothly in the outer mast.