This roller 2. Outer mast roller and middle mast upper roller clearance adjustment ) Measure the clearance with the mast overlap at near 450 mm (1 7.72 in). (2) Shift the inner mast to one side to bring the roller into contact with the inner mast and middle mast, and adjust the clearance between the roller and mast at the closest position on the op - posite side to the following value by inserting the outer mast roller shim and middle mast upper roller shim respectively. (1 (0 - 0.031 in) Shim thickness: 0.5 and 1.0 mm (0.020 and 0.039 in) 0 - 0.8 mm Standard clearance B = (3) Distribute the shim thickness equally to the left and right sides.
(4) After the adjustment, check that the inner mast moves smoothly in the middle mast and the middle mast moves smoothly in the outer mast.