Toyota — Mast

Lift Bracket Roller Adjustment (FSV) Lower lift roller Lift bracket T into contact Bring into contact \ 1. Lift roller and side roller clearance adjustment (1) Measure the clearance with the lift bracket at the uppermost position. (2) The upper lift rollers need no adjustment because they are fixed by snap rings. (3) For the lower lift rollers, shift the lift bracket to one side to bring the roller into contact with the inner mast, and measure the clearance between the roller side face and the mast at the closest position on the opposite side to the following value by inserting the lift roller shim. Standard clearance C = (0 - 0.020 in) Shim thickness:

0.5 and 1.0 mm (0.020 and 0.039 in) 0 - 0.5 mm Distr~bute the shim thickness equally to the left and right rollers. (5) Adjust the side rollers after adjusting the lower lift rollers. Bring the side roller on one side into con - tact with the mast side surface, and adjust the clear - ance between the side roller and inner mast side surface to the following value by inserting the side roller shim: (4) Standard clearance D = ( 0 - 0.024 in) Shim thickness: 0.5 and 1.0 mm (0.020 - 0.039 in) 0 - 0.6 mm (6) Distribute the shim thickness equally to the left and right sides. 2. After the adjustment, the lift bracket should move smoothly along the overall mast length.