Mast Strip Adjustment (FSV) I Middle mast / I 1. Mast strip clearance adjustment (1) Measure the clearance with the inner mast or middle mast at the bottom position. (2) With the inner mast in contact with the middle mast upper roller, adjust the clearance between the mast strip and inner mast to the value shown below by inserting the mast strip shim. Then, with the middle mast in contact with the outer mast roller, adjust the clearance between the mast strip and the middle mast to the value shown below by inserting the mast strip shim. Standard clearance E = 0.5 - 1.0 mm (0.020 - 0.039 in) Shim thickness:
0.5 and 1.0 mm (0.020 - 0.039 in) (3) After the adjustment, the mast should move smoothly.