Toyota — Cylinder

DISASSEMBLY -1NSPECTION.REASSEMBLY Note: Oil will leak if the U packing or dust seal at the rod guide portion is defective. Natural drop will occur if the U packing at the piston portion is defective. Disassembly Procedure 1 Remove the cylinder cover. 2 Remove the rod guide. 3 Remove the piston rod. [Point 11 4 Remove seals from the piston side. 5 Remove the flow regulator valve or safety down valve. 6 Remove the lift cylinder. [Point 21 Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note: Do not install dry parts but apply hydraulic oil before reassembly.

Apply liquid packing (08833-00080) on the threaded portion of the cylinder cover before tightening. Cylinder cover tightening torque T = 284.39 - 421.69 N-m (2900 - 4300 kg - cm) [209.82 - 31 1.1 1 ft-lb]