/ 2 Piston rod Wlpiston I Disassembly Procedure 1 Loosen the tilt cylinder cover. [Point 11 2 Extract the piston rod WJpiston. 3 Remove the tilt cylinder. [Point 21 4 Remove the piston. 5 Remove the rod guide. 6 Remove the piston rod. [Point 31 7 Remove the piston rod joint. [Point 41 Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note: Do not disassemble dry parts but apply hydraulic oil before reassembly. Apply liquid packing [209.82 - 253.23 ft - lbl Rod joint set bolt tightening torque T = 60.90 - 1 13.17 (08833-00080) on the threaded portion of the cylinder cover before tightening.
Piston castle nut tightening torque T = 284.39 - 343.23 N-m (2900 - 3500 kg - cm) [44.93 - 83.49 ft - lbl Cylinder cover tightening torque T = 284.39 - 421.69 N-m (621 - 1 154 kg - cm) N.m (2900 - 4300 kg - cm) [209.82 - 31 1.1 1 ft - lbl