Toyota — Cylinder

Point Operations [Point 1 I Disassembly~reassembly: SST 09620 - 1 01 60 - 7 1 [Point 21 Inspection: Measure the cylinder bore. Standard bore: 70.0 mm (2.756 in) Limit bore: 70.35 mm (2.7697 in) [Point 31 Inspection: Measure the piston rod outside diameter. Standard outside diameter: 30.0 mm (1.181 in) Limit outside diameter: I I 29.92 mm (1.1780 in) Inspection: Measure the piston rod bend. Limit bend: 1.0 mm (0.039 in) Disassembly: Put a match mark. Reassembly: Check the match mark. Reassembly: When the rod or rod joint is replaced, adjust the installed dimensions to be equal on the left and right sides. Unit: mm (in)