Toyota — Oil Pump

Point Operations [Point 1 I Disassembly: Punch a match mark. Reassembly: Align the match marks. [Point 21 Discharge side % Inspection: lnspect the contact trace on the side face of the bushing. Normal = Contact trace relatively stronger on the suction side and slight on the discharge side Suction side Contacting trace Length Inspection: Measure the bushing inside diameter. Limit inside diameter: 19.123 mm (0.75287 in) Inspection: Measure the bushing length in the axial direc - tion. Bore Limit length: 26.41 1 mm (1.03980 in) Inspection: Measure the gear shaft outside diameter. Limit outside diameter: 18.935 mm (0.74547 in) [Point 31 Inspection:

lnspect the gear contact trace on the body in - side surface on the suction side. Limit: Contact trace on more than half of cir - cumference Inspection: Measure the depth of flaw on the body inside surface. Limit flaw depth: 0.1 mm (0.004 in)