DISASSEMBLY - INSPECTION - REASSEMBLY (22) T = N.m (kg - cm) [ft-lb] I 4 1 Disassembly Procedure 1 Remove the cover. [Point. 1 I 2 Remove the seals. 3 Remove the side plate. [Point 21 4 Remove the pump gear. [Point 31 5 Remove the body. [Point 41 6 Remove the side plate. [Point 21 7 Remove the seals. 8 Remove the cover (mounting flange). 9 Remove the oil seal. Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note: Wash each part, blow with compressed air and apply hydraulic oil before reassembly. Use new seals for reassembly.