Note: Operate in a clean place. As each part is finished with high precision, carefully disassemble them to prevent any damage. Disassembly Procedure 1 Remove the seal holder. 2 Remove the spring cover. 3 Remove the tilt spool and lift spool. [Point 11 4 Remove the relief valve. [Point 21 5 Remove the flow divider valve. 6 Remove the check plunger. 7 Remove the outlet housing. Reassembly Procedure The reassembly procedure is the reverse of the disassembly procedure. Note: Wash each part thoroughly, blow with compressed air and apply hydraulic oil before reassembly.