Toyota — Clutch

[Point 51 Installation: Apply grease on the following places. Portion A in figure (in release hub): Fill MP grease. Portion B in figure (sliding contact faces of the release bearing and bearing plate): Apply chassis grease. Portion C in figure ( 2 release fork pawl portions): Apply chassis grease. Greasing of Clutch Release Fork Shaft and Clutch Release Hub 1. After performing a maintenance job in the clutch hous - ing, apply grease to the clutch release fork shaft and clutch release hub. These portions shall be greased periodically according to the vehicle use state. Grease to be used: MP grease