REASSEMBLY OF BASIC ENGINE 4.4 Installing valve lock &$87,21 If valve spring is overcompressed, the lower end of the retainer comes into contact with the stem seal, and causes damage to the stem seal. Valve lock Install the retainer on the valve spring. Compress the valve spring using a valve lifter, and install the valve locks. Installing valve lock 4.5 Installing cylinder head gasket &$87,21 Do not use liquid gasket. Guide bolt (1) Make sure that there is no dirt or dents on the top surfaces of the cylinder block and pistons. (2) Screw in two guide bolts in the bolt holes of the cylinder block. (3) Place the new cylinder head gasket on the cylinder block aligning to the guide bolts. Note:
The model name is stamped on the front top face of the gasket so that it is not confused with one for other model. Installing cylinder head gasket Cylinder head gasket 4.6 Installing cylinder head assembly Align the cylinder head to the locating guide bolts, and install the cylinder head. Cylinder head Installing cylinder head assembly 7-18