FUEL SYSTEM 2.4.1 Removing swivel nipple (1) Grab the plunger of the pump housing with a vise. (2) Remove the swivel nipple from the pump housing. Swivel nipple Pump housing Vise Removing swivel nipple 2.4.2 Removing tappets (1) Turn the pump housing upside down and grab the housing with a vise. (2) Remove the stop wire bracket and remove the control rack. Stop wire bracket Control rack Pump housing (3) Push in the tappet and, pull out the tappet guide pin with tweezers. (4) Remove the tappet.
Removing stop wire bracket Tappet guide pin Tappet Removing tappet guide pin 2.4.3 Removing plunger Using tweezers, remove the tappet shim plate, spring lower seat, plunger, plunger spring, spring upper seat and control sleeve from the pump housing. Tappet shim plate Spring lower seat Plunger Plunger spring Spring upper seat Control sleeve Removing plunger 8-13