Mitsubishi — 3.2.5 Installing rack set screw

FUEL SYSTEM 3.2.5 Installing rack set screw &$87,21 The rack set screw are properly adjusted at the factory before shipment. Do not work on the rack set screw unless absolutely necessary. Torque set nut Adjust and reassemble the rack set screw as described in the following. (1) Adjust the speed control lever with the high speed set bolt. After setting it to the high idle engine speed, secure it by nut. (2) Screw in the rack set screw at rated engine speed, set it to the rated engine power. (3) Secure it by torque set nut. (4) Put the rack set screw sealing cap and firmly tighten the sealing cap. Screw in the rack set screw at rated engine speed.

Set it to the rated engine power and secure it by torque set nut. Sealing cap (fix it after setting) Special nut 14.7 㨪 24.5 N·m {1.5 㨪 2.5 kgf·m} [10.9 㨪 18.1 lbf·ft] Installing rack set screw 8-30