Mitsubishi — 3.2.4 Installing torque set spring (Double spring, two point control)

FUEL SYSTEM 3.2.3 Installing torque spring set (Single spring, double spring) For installation and adjustment &$87,21 The torque spring set is properly adjusted at the fac- tory before shipment. Do not work on the torque spring set unless absolutely necessary. Adjust and reassemble the torque spring set as described in the following. (1) Adjust the speed control lever with the high speed set bolt. After setting it at the high idle engine speed, secure it by nut. (2) Screw in the torque spring set at the rated engine speed. Set it to the rated engine power and secure it by special nut. (3) Put a torque spring set sealing cap on the torque spring and firmly tighten the sealing cap.

Do not wrok on this screw unless absolutely necessary. Screw in the torque spring set at the rated engine speed. Set it to the rated power and secure it by special nut. Sealing cap (fix it after setting) Special nut 14.7 㨪 24.5 N·m {1.5 㨪 2.5 kgf·m} [10.9 㨪 18.1 lbf·ft] Installing torque spring set (single spring) 3.2.4 Installing torque set spring (Double spring, two point control) Adjust and reassemble the torque spring set as described in the following. (1) Adjust the speed control lever with the high speed set For installation and adjustment bolt. After setting it to the high idle engine speed, secure it by nut. (2) Screw in the torque spring set at maximum torque engine speed.

Set it to the maximum torque and secure it by special nut. (3) Screw in the adjusting screw at the rated engine speed. Set it to the rated engine power and secure it by special nut. (4) Put a torque spring set sealing cap on the torque spring and firmly tighten the sealing cap. Screw in the adjusting screw at the rated engine speed. Set it to the rated engine power and secure it by special nut. Screw in the torque spring set at maximum torque engine speed. Set it to the maximum torque and secure it by special nut. Sealing cap (fix it after setting) Special nut 14.7 㨪 24.5 N·m {1.5 㨪 2.5 kgf·m} [10.9 㨪 18.1 lbf·ft] Installing torque spring set (double spring) 8-29