COOLING SYSTEM 2. Disassembling, inspecting and reassembling cooling system 2.1 Disassembling and inspecting thermostat 1 Replace 2 3 Disassembling and inspecting thermostat Disassembling sequence 1 Thermostat cover 2 Thermostat 3 Thermostat case 2.2 Inspecting thermostat &$87,21 Be careful of burns or a fire when measuring tempera- ture, as it involves a high-temperature and open flame. Stir hot water well. To test the thermostat operation, immerse the thermostat in a container filled with water. Heat the water, while measuring the water temperature. Record the temperature at the conditions shown in the table below.
If the temperatures are not within the standard range, replace the thermostat. Note: (a) Stir the water in the container with a stick to ensure uniform temperature distribution. (b) Before installing the thermostat, be sure to check the valve opening temperature stamped on the thermostat valve side face. Inspecting thermostat Item Standurd Temperature at which valve starts opening 76.5 ± 1.5°C [167 to 172°F] Temperature at which valve lift becomes 6 mm [0.24 in.] or more 90°C [194°F] 10-3