ELECTRICAL SYSTEM 2.4.7 Checking armature coil (1) Inspect the armature coil using a growler. Hold a piece of iron plate against the armature core. If the iron plate vibrates, replace the armature with a new one. Growler tester Iron plate Inspecting armature coil for short circuit (2) Check that there is no continuity between the commutator and the shaft (core). If any continuity is observed, replace the armature with a new one. Checking armature coil for grounding (3) Check that there is continuity between segments in various combinations. If poor or no continuity is observed, replace the armature with a new one.
Checking armature coil for breaks 2.4.8 Inspecting rear bracket Replace the rear bracket if the bearing is worn. 12-17