Mitsubishi — 2.5.3 Installing gear shaft

ELECTRICAL SYSTEM 2.5.2 Installing pinion &$87,21 Before assembling, apply grease to the inner race groove of the front bracket bearing. Be sure to use a new stopper ring. Do not reuse the stopper ring that has been removed. Stopper ring Stopper Shaft of overrunning clutch Pinion (1) Put the overrunning clutch through the front bracket. (2) Fit the internal gear into the gear shaft. (3) Put the gear shaft through the overrunning clutch and install the stopper on it. (4) Install the stopper ring firmly to the shaft groove of overrunning clutch. (5) Using a gear puller, firmly pull the pinion stopper closer to the stopper ring to fix.

Pinion spring Installing pinion 2.5.3 Installing gear shaft &$87,21 Be sure to use a new stopper ring. Do not reuse a removed one. Stopper ring Stopper Shaft of overrunning clutch (1) Reassemble the lever to the overrunning clutch. (2) Fit the internal gear into the gear shaft. (3) Put the gear shaft through the overrunning clutch and install the stopper on it. (4) Fit the stopper ring into the groove of the stopper ring and firmly pinch it. (5) Using a gear puller, firmly pull the pinion and fit the stopper into the stopper ring. Note: The adjustment of play in the axial direction of the gear shaft is not necessary because its required amount is automatically secured.

Pinion Gear shaft Installing gear shaft 12-20