Mitsubishi — 2.7 Disassembling and inspecting starter (M002T66071 (24V-3.2kW))

ELECTRICAL SYSTEM 2.7 Disassembling and inspecting starter (M002T66071 (24V-3.2kW)) Broken coil wire Wear Looseness, abnormal noise and rotation condition of bearing Metal wear Wear and damage of gear Pinion gear wear Wear and damage of gear Rotation condition Replace:

Stopper ring Wear of brushes, rust and deterioration of spring and insulation check of holder Rotation condition Broken wire, short circuit and ground of coil, roughness and wear of commutator, and damage and wear of gear Disassembling and inspecting starter (M002T66071 (24V-3.2kW)) Disassembly sequence 1 Magnet switch 6 Rear bearing 11 Spring set 2 Rear bracket 7 Front bearing 12 Pinion set 3 Brush and brush holder 8 Cover set 13 Lever 4 Yoke 9 Center bracket 14 Pinion shaft 5 Armature 10 Reduction gear 15 Front bracket 12-26