Mitsubishi — 2.6.3 No load test

ELECTRICAL SYSTEM 2.6.3 No load test &$87,21 Use as thick a wire as possible and firmly tighten each terminal. When detecting the rotation at the tip of the pinion, be careful, as the pinion pops out during operation. 㧭 Ammeter 㧿 59 㧮 Voltmeter Starter 㨂 (1) Connect the starter to the circuit as shown in the illustration. (2) In normal condition, the pinion pops out when the switch is turned ON, and the starter rotates at or more the specified rotation speed. If the terminal voltage, current or rotation speed does not meet the standard, disassemble, inspect and repair the starter.

Battery 24V Test at no load 12-25 Item Standard Starter model M002T66071 Nominal output V-kW 24-3.2 No-load charac- teristics Terminal voltage V 23 Current A 80 or less Rotation speed min-1 3400 or more