Mitsubishi — 2.8.10 Inspecting center bracket

ELECTRICAL SYSTEM 2.8.8 Inspecting continuity of yoke assembly Check that there is continuity between M terminal of field coil and the lead wire for the brush. If no continuity is observed, replace the yoke assembly with a new one. Checking field coils for breaks 2.8.9 Inspecting insulation between yoke body and brush Check that there is no continuity between yoke body and brush. If continuity is observed, replace the yoke assembly with a new one. Checking field coils for grounding 2.8.10 Inspecting center bracket Check the bearing. If the bearing is worn, replace the center bracket . 12-33