Mitsubishi — 1.5.1 Bleeding air from fuel filter

ADJUSTMENT AND OPERATION 1.5 Bleeding fuel system :$51,1* Completely wipe off any spilled fuel from air vent plug with a cloth, as spilled fuel can cause a fire. Bleeding of the fuel system must be started from the place closest to the fuel tank: the fuel filter the first and the fuel injection pump the last. 1.5.1 Bleeding air from fuel filter (1) Cartrige type paper element Loosen the air vent screw marked by the letter "1." Tighten the air vent screw when fuel does not show air bubbles. Loosen the air vent screw marked by the letter "2." Tighten the air vent screw when fuel does not show air bubbles. Note: Place the starter key in the ON position for the fuel pump type.

When the fuel supply is gravity type, fuel will flow into the filter by itself. (2) Cock type paper element (1) Place the fuel filter cock lever in the OPEN position and push the button several times to bleed the filter. Note: When the fuel supply is gravity type, fuel will drop by itself, and when the fuel supply is the pump type, fuel and air in the filter will flow out with the starter key positioned ON. (3) Cock type paper element (2) Loosen the left side air vent screw. Tighten the air vent screw when fuel does not show air bubbles. Loosen the right side air vent screw. Tighten the air vent screw when fuel does not show air bubbles. Note:

When the fuel supply is gravity type, fuel will flow into the filter by itself, and when the fuel supply is the pump type, fuel and air in the filter will flow out with the starter key positioned ON. Air vent screw Loosen air vent screws in numerical order to bleed air Bleeding air from fuel filter (cartridge type) Press the push button several times. 2 ' 0 㐿 1 Cock lever (open) Bleeding air from fuel filter (switch cock type) Left side plug Right side plug E Q Cock lever (open) Bleeding air from fuel filter 13-7