ADJUSTMENT AND OPERATION 3. Performance test (JIS standard) The following describes the procedures specified in "Earth moving machinery - Engines - Part 1: Test code of net power (JIS D0006-1)" and "Earth moving machinery - Engines - Part 2: Standard format of specifications and testing methods of diesel engines (JIS D0006-2)." Other test items may be required in some applications. All test results should be evaluated comprehensively in order to determine the engine performance. 3.1 Engine equipment condition The engine must be equipped with standard auxiliary devices such as cooling fan, air cleaner and alternator.
3.2 Test items and purposes 3.2.1 Operation load test Conduct this test to evaluate the engine output, torque, fuel consumption rate and governor performance under various load conditions. 3.2.2 Continuous load test Operate the engine continuously for 10 hours at 90% load (continuous load application) of nominal net brake power while the engine speed is maintained at revolutions corresponding to the nominal brake power. In this test, evaluate the fuel consumption rate and operating condition, and confirm that the engine is capable of continuous operation. 3.2.3 Low idle test Conduct this test to confirm that the engine can operate stably at the specified low idle speed.
3.3 Other inspections Check for gas, coolant and oil leaks; abnormal odors; and hunting. Make adjustment as needed. 3.4 Engine output adjustment Diesel engine output is affected by atmospheric pressure, temperature and humidity. Therefore, correction calculations must be performed to obtain the value of engine output under the standard atmospheric conditions. 3.4.1 Standard atmospheric conditions: Base temperature: 298 K (25 ° C) [77°F] Total pressure: 100 kPa (750 mmHg) Dry pressure: 99 kPa [743 mmHg] 13-11