Mitsubishi — 1.2.2 Problem: Starting trouble

TROUBLESHOOTING 1.2 Starting trouble 1.2.1 Check items before troubleshooting (1) Clogging of air cleaner element (2) Coagulation of engine oil (3) Use of poor quality fuel (4) Drop in cranking speed 1.2.2 Problem: Starting trouble Is the preheating device normal? NO NO Is power applied to the glow plug wire immediately after the key switch is turned ON? Inspect key switch, wiring and glow signal YES YES Inspect glow plug Is the electrical wiring normal? If the preheating device is equipped with a fuel pump, does the pump operate when the key switch is turned ON? Inspect wiring of fuel pump NO YES Is fuel drained when the air bleeding screw of the fuel injection pump is loosened?

Does fuel flow in the fuel line? NO NO Inspect fuel filter, fuel pipe and fuel tank YES Is the engine correctly adjusted (fuel injection timing and valve clearance)? NO Adjust engine YES Are fuel injection nozzles normal (spray state and injection-valve opening pressure)? NO Inspect fuel injection nozzles YES Is the compression pressure in cylinders normal? Inspect valves, pistons, piston rings and cylinder head gasket NO YES Inspect fuel injection pump Problem: Starting trouble 14-3