DISASSEMBLY OF BASIC ENGINE 1.1 Removing rocker shaft assembly (1) Loosen the rocker arm adjusting screw by about one turn. (2) Loosen the rocker stay bolts and remove the rocker shaft assembly. Note: When removing the rocker shaft assembly, remove it together with the rocker stay bolts, and keep them together for reassembling. Rocker stay bolt Rocker shaft assembly Removing rocker shaft assembly 1.2 Disassembling rocker shaft assembly (1) Pull out the grooved pin with a pair of pliers. Grooved pin Removing grooved pin (2) Remove snap rings from both ends of the rocker shaft. Disassemble the rocker shaft assembly into the rocker arms, rocker stays, rocker shaft springs and rocker shaft.
Note: Be sure to arrange the parts of rocker shaft assembly in the order of disassembling. Reassemble the rocker shaft assembly in the reverse order of disassembly by making sure of the original combination of rocker arm and shaft assembly so that the same clearance between the rocker shaft and arms is restored when reassembling. Rocker stay Rocker arm Rocker shaft spring Rocker shaft Disassembling rocker shaft assembly 5-3