DISASSEMBLY OF BASIC ENGINE 1.3 Removing cylinder head bolt Loosen cylinder head bolts in the numerical order as shown in the illustration. Cylinder head bolt (main) Cylinder head bolt (sub) Loosening order of cylinder head bolt (L2) Cylinder head bolt (main) Cylinder head bolt (sub) Loosening order of cylinder head bolt (L3) 1.4 Removing cylinder head assembly &$87,21 When removing the cylinder head gasket, be careful not to damage the cylinder head or crankcase surface by tools such as a screwdriver. (1) Remove the cylinder head bolt. (2) Remove the cylinder head assembly by lifting it up. Note:
If the cylinder head assembly cannot be removed due to crimping of the cylinder head gasket, tap the thick area on the side of the cylinder head using a plastic hammer to give a shock. (3) Remove the gasket from the cylinder head. Note: If there is a cylinder head problem, check the bolts for tightness with a torque wrench before removing the cylinder head bolts. Removing cylinder head assembly 5-4