Komatsu — CHANGE OIL IN FINAL DRIVE CASE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 76 EVERY 2000 HOURS SE Maintenance for every 50, 250 , 500 and 1000 h ours serv ice should be c arried out at the s The part s an d oil are at high tem perature after the engine is s topped, and may cause s erious burns . Wait for the temperature to go do wn b efore starting the If there i s stil l pressure remainin g inside the case, t he oil or plu g may fly out. Tu rn the p lug slowly to release the pressure , then remove Refill capacity: Front left, rig ht 6.5 liters (1.72 US gal) e ight 5.5 liters (1.4 5 US gal) ht 7.0 liters (1.85 US gal) 1. Stop t he machine so that and d rain plug (P) is at the 2. again 3.

Add o il through the hole fo r plug (G) to the specified l 4. After adding oil, check that the oil is at the s pecified le vel. See "CHECK FINAL DRIVE CASE, ADD OIL (PAG 5. Repe at th e procedure in St eps 1 - 4 and change the oil to all the final d rive cases (front, cen ter, rear).