. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DIFFERENTIAL CASE WARNING 4 - 77 Th e parts and oil are at high temperature after th e engine i s stopped , and may cause serious burns. W ait for the temperature to go d own be fore starting t he operation. If there is still pressure remaining in side t he cas e, the oil or plug may fly ou t. T urn the plug slowly to rel ease the pressure, then remov e it care Refill capaci ty: Front 18. 5 liters (4.89 US g 3.0 liter s (8.7 2 US gal) 31. 0 liters (8.19 US g 1. 2. 3. 4. 1. Remove dr ain plug (P), drain the oil , then tighten t he plug a gain . iller port (F). 2. Add oil to t he specified level t hroug h the hole for p lug (G) o r oil f iller 3.
After addin g oil, check t hat the oil is at the specified level. Se e "CHECK OIL LEVEL IN DIF FERENTIAL CASE, ADD OIL ( PAGE 4-59)" 4. Repeat the procedure i n Step s 1 - 3 and change th e oil to a ll the differential cases (front, Fron