2. CONTROLS 2.1 INSTRUMENT PANEL 1 19 24 20 21 22 23 25 2 C3170 Fig. 2.1A 1. Fuel Gauge: The fuel gauge indicates the quantity of fuel remaining in the fuel tank. 10. Brake Indicator Light: The brake light will illuminate when the parking brake is engaged. 2. Ignition Switch: The ignition switch is a four (4) position switch: ‘OFF’, ‘PRE-HEAT’, ‘RUN’ and ‘START’. Turn the key counter clockwise to engage engine ‘PRE-HEAT’. Turn the key clockwise to the ‘START’ position, this engages the starter. The key will be in the ‘RUN’ position when released. Turn the key to ‘OFF’ to shut off the engine and remove the key. 11. Seat Belt Indicator Light:
This light will illuminate when the seat belt is unfastened. 12. Hydraulic Oil Pressure Indicator Light: This light will illuminate when there is low hydraulic oil pressure. If this light illuminates, shut off the engine and determine the cause (not available on all models) . 3. Hour Meter: The hour meter records the number of engine operating hours and has a total of 9999.9 hours. 13. Rotary Beacon Indicator: This light will illuminate when the optional rotary beacon (not available on all models) is turned on. 4. Left Signal Indicator Light: This light will illuminate when the operator uses the optional left signal (not available on all models) . 14. Engine Oil Pressure Indicator:
This light will illuminate when the engine loses lubrication pressure. Shut off the engine immediately and determine the cause. 5. Auxiliary Front Indicator Light: This light will illuminate when the loader auxiliary hydraulic front switch (not available on all models) is turned on. 15 . Coolant Temperature Indicator Light: This light will illuminate if there is a rise in engine temperature. If this occurs, shut off the engine immediately and determine the cause. 6. Hi-Flow Hydraulics Indicator: This light will illuminate when the loader hi-flow hydraulics (not available on all models) are in use. 16. Alternator Indicator Light:
This light will illuminate when the alternator is not producing sufficient current. 7. Work Lights Indicator: This light will illuminate when the loader work lights are turned on. This will serve as a reminder to turn them OFF when the loader is not in use. This engine is equipped with glow plugs. Do not use ether or any high energy fuels to assist starting. IMPORTANT 8. Right Signal Indicator Light: This light will illuminate when the operator uses the optional right signal (not available on all models) . 9. Hydraulic Oil Temperature Indicator: This light will illuminate when the oil temperature has exceeded recommended levels. Shut off the engine immediately and determine the cause.
To prevent personal injury do not start the engine unless you are in the seat with the seat belt fastened around you. 10 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 3 NT with g use e energ WARNING To prevent personal injury never add fuel to the loader when the engine is running or is hot. NO SMOKING! ING in en the