. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING 4. Check for leakage from fuel line. Check that there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out repairs. 3 - 72 WALK-AROUND CHE CK Before starting the engin e, walk around the machine and look at the undersi de of chassis for a nything u nusual l ike loose bolts and nuts, lea hydraulic system. kage of fuel, oil and coolant. Also check the condition of the work equipment and the g, play, and collection of dust at places that reach high temperature.
the Also check for loose wirin g, play, and collection of dust at places that reach high temperature Always hang a warning s ign on the work equipment control l evers. Spilled fuel or oil or accu mulation of flammable materials aro und the battery or o ther high-temperatu re parts of the engine, such as the engine muffle or contact your Komatsu r or turbocharger will cause fire on t he machine. Always check thoroughly an d repair an y problems distributor. Always repair any damag e to the handrails and steps, and tigh ten any loose bolts. Failure to do this ma y cause wo rkers to fall and suffer serious person al injury. If the machine is at an an gle, reposition it level before ch ecking.
Perform the following ins pections and cleaning every day before starting en gine for the day's work 1. Check for damage, w ear, play in work equipment, cyl inders, linkage an d hoses. Check that there are any abnormality is fo no cracks, excessive wear, or pl ay in the work equ ipment, cylinders, linkage, o r hoses . If und, repair it. 2. Remove dirt and dus t from around engine, battery an d radiator. tor or around the engine. Check also that there are no Check that there is n flammable materials ( the engine, such as t them immediately.
o dirt accumulated in the radia no dry leaves, twigs, etc) accumula ted around the bat tery or other high-temperatu re parts of he engine muffler or turbocharger. If any dirt or flammable materials are found, remove foun 3. Check for coolant or oil leakage around the engine. Check that there is n is found, repair it. o oil leakage from the engine or coolant leakage fr om the cooling sys tem. If an y problem 5. Check for leakage of oil from transmission case, axle , hydraulic tank, h Check that there is n o oil leakage. If any abnormality is found, repair th 6. Check for oil leakage from the brake line. Check that there is n o oil leakage. If any abnormality is found, repair th