. OPERATION OPERATION 3 - 73 7. Check for damage d or wor n tires, wheels , and wheel hub bolts and nuts , check for loose wheel hub bolts and nuts. Check wear (sid rim, base, lock Tighte n an y loose wheel h ub bolts or nut s. If any abnormality is found, repair o r replace the part. If a ny v alve caps a re missi ng, install new 8. Check for damage and loo se bolts on the handrail and Repair any damag e and tig hten any loos 9. Check for damage to gaug es, lamps on t he instrumen t panel an d loose Check for d amage to the pa nel, gauges a nd lamps. If a ny proble m is found, replace the parts. Clean off any dirt on the surface.
Tig hten an NOTICE Before st artin g operations, clea n all dirt from the surface of the lamps. If t he lamps are used with mud stuck to the surface, the lamp ma y overheat an d suffer d amage. If the lam p is cleaned w hen it is overheated, the sudden chang e in temperature ma y cause the l ens to crack . Turn the lamp off and wait for t he temperature to go down before cleaning the la mp 10. Check for l oose air cleaner mounting bolt Check for t he loos e bolts. I f loose, tighten 11. Check for l oose ba ttery ter Tighte n an y loose terminal