. OPERATION OPERATION WARNING REMARK Tightening torque: 19.6 to 29.4 Nm (2.0 to 3.0 kgm, 14.5 to 21.7 lbft) belt with a new part. kgm, 1808.3 to 2242.2 lbft). the ground. 3 - 74 12. Check for da mage to the seat belt an d mounting c lamps.
Even if there appea rs to be no abnormality wit h the seat belt, replace The date of manu facture of the seat belt is marked on th e belt a t the place indicated b y the arrow in the diagra m on the righ Check that there are no loose bolts on the equipment m ountin g the seat belt to the m achine, and tighten if ne If the belt is dam aged or fluff is starting t o form, or if t here is any damage or defor mation of the seat belt holders, replace the seat 13. Check for loo loose or damaged bolts . If any loose bolts a re found tighten them to 245 2 to 3050 Nm (250 t o 310 e damaged, replace the m with genui ne Komatsu 14. Clean cab wi ndow. Clean the cab the machine.
When cleani cleaning equi window to ensure good visibility when operating ng the front glass, use commercially available pment and carry out the cleaning operation from 15. Check rear vi ew mirror, under view m irror Check that th and adjust the seat. When cleanin e mirrors are not damag ed. Replace them if they are damaged. Clean the surface of the m irrors angle so that the operat or can see th e area to the rear and under the ma chine from the operator's g the mirrors, use a mop with a long handle. g the mirrors, use a mo p with a long handle