. OPERATION OPERATION ADJUST SEAT BELT Always wear the seat belt. WARNING 3 - 86 (J) Adjusting height of ar mrest (steering wheel specificatio n machine s only) Remove cap (6), then loo sen the nut. Set to the desired he ight, then tighten the nut and in stall the cap. Amount of adjustment: U p: 16 mm (0.6 in) own: 24 mm (0.9 in) e the armrest spring up. D It is also possible to mak (K) Adjusting angle of ar mrest (steering wheel specificatio n machine Turn knob (7) to adjust th Amount of adjustment: 4 0 degrees (front: 30 degrees; rear : 10 degrees) (L) Lumbar support Turn knob (8) to the right or left to give suitable tension to t he lumba r region.
(M) Adjusting hardness o f suspension damper st the damping force of the suspension Operate knob (9) to adju ension damper. If knob (9) is mo ved to face the outside of the seat (a), the damping force becomes stronger; if the knob is moved to f ace the inside of the seat (b), the damping force becomes weaker. Amount of adjustment: 5 Before fastening the seat belt, check that there is no abnormality in the belt-mounting bracket or mou nting of the belt. If the bel is worn or damaged, repl ace it. re starting operations. t during operations. d right belts are not twisted when fastening the seat belt.
Fasten the seat belt befo Always wear the seat bel Make sure that the left an d right belts are not twisted when fas tening the s eat belt. FASTENING AND REMOVIN G BELT is tight without being too tight. ess the brake pedal fully, and adjust the k is pressed against the backrest. l the right belt, then insert tongue (1) Fasten the belt so that it 1. Sit on the seat, depr seat so that your bac 2. Sit on the seat, pul securely into buckle check that it is firmly 3. When removing the free the belt. Fit the belt so that it f k is pressed against the backrest l the right belt, then insert tong (2) until a click is heard. Pull the belt to locked.
belt, press the red button in buckle (2) to ollows your body and is not twisted. ollows your body and is not twiste