Komatsu — REMOTE POSITIONER

. OPERATION OPERATION REMOTE POSITIONER METHOD OF OPERATING REMOTE POSITIONER 3 - 111 This machine is equipped with a remote po sitione r functi 1. When remot e positioner RA ISE/LOWE R selector swi tch (1 ) is pressed, the system is turn ed ON, the remot e positio ner stop display lamp lights up, and the remote positioner is s et to t he actuation co REMARK Eac h time the re mote positione r RAISE/LOWER s elector switch is pressed, the ligh ting of the disp lay lamp ch anges as follo 1: ↓ 2: ↓ 3: ↓ 4: 2. When the re mote position er RAISE st op display la mp (2) is lighted up, if the lift arm c ontrol lever is moved fro position (A) position.

When the lift will reduce spee d and stop, a ame ti me, the lift arm rm control lever will return to H OLD positio n (A). 3. When remot e positioner L OWER sto p display lam is moved fro or maximum p (3) is lighted up, if the lift arm c ontrol lever m HOLD position (A) to FLOAT po sition (C) LOWER position (D), and the lift arm goes down to the LOWER stop set position, it r educes speed and stops. If the s held in position, the lift arm is set t o the STOP