Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING METHOD OF TOWING MACHINE WARNING 3 - 159 Injury or death could result i f a disabled machine is towed i ncorrectly or i there is a mistake in the sele ction of the wire rope or drawb ar. Always confirm that the w ire rope or drawbar used for tow ing ha s ampl strength for the weight of the machine being towed. Never use a wire rope wh ich has cut strands (A), reduce d diameter (B) or kinks (C). There is dan ger that the rope may break dur ing the towin operation. es when handling wire rope. a slope. Always wear leather glov Never tow a machine on Never go between the to wing machine and the towed m achine durin the towing operation.

If the machine moves sud denly, a load is applied suddenl y to the towin wire rope or drawbar, and the towing wire or drawbar ma y brea k. Mov the machine gradually to a constant speed. Be extremely careful if th ere is a failure in the engine or brake s ystem the brakes will not work. brakes on the disabled machine cannot b ne ride on the disabled machine. If the steering and the operated, do not let anyo ne ride on the disabled machin NOTICE apacity for this machine is as shown below. Do not tow any load greater than this. g) g) The permissible towing c apacity for this machine is as s hown b elow. Do not tow a ny load gr eate r than this. WA800: 498940N (50910k WA900:

524910N (53560k The machine should be t owed only to a position where it is possible t o carry out in spection and maintenance. This operation is only for towing short d istances. Do not tow the machi ne for l ong di stances. Please consult your Kom atsu distributor for information about towing a disabled