Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE REMARK 4 - 77 3. Remov e drain plug ( 3) to drai 4. Stop th e machine so that drai n plug (4) o f the final drive is at the bottom . Remove oil f iller plug (5) and dr ain plug ( 4), an d fit the tube of attached tool in hole o f plug (4) and drain the o 5. After d raining rai install t hem. 6. Add oil to the specifi ed level through th e oil filler ports (1) and (5) of t he axle housin g and le ft and right final drives. ) that the oil i 7. After a dding oil, che ck at le vel plug (1 ) that th the specifi ed leve l.

For see "CHEC LEVEL, ADD O For operati ons where th e brake i s used freq uently, c hang e the axle oil at shorter intervals.