Komatsu — HANDLING AUTO-GREASING SYSTEM

. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM 3. Turn the starting switch key to the ON position and check that auto greasing pilot lamp (5) on the main monitor lights up. Lamp lights up: Normal Electricity is supplied to the auto-greasingsystem, and when there is no abnormality and the grease pump is being actuated to supply grease, the indicator lamp lights up when the pressure of the grease and the supply line is above the specified pressure. Lamp flashes: The indicator lamp flashes when grease inside the grease pump is short; the electric circuit is disconnected; and pressure in the supply line does not reach a specified pressure level while the grease pump is in operation.

The lamp keeps flashing until pressure in the supply line reaches a specified pressure level after the pump begins to work. Once the specified pressure level is reached, the lamp lights up. Therefore, flashing in this instance is nothing abnormal. If on the other hand the lamp does not stop flashing (i.e. does not light up) even though grease has been sufficiently added, then there is something wrong with the machine. In that case, stop the machine at once and consult your Komatsu distributor. 6 - 3 HANDLING AUTO-GREASING SYSTEM With t his system, the gr ease is automatically supplie d through the 1. Check that a can or grease is in the grease pump case.

If the grease level is low, fill with grease. 2. Check that there is no leakage of grease between the grease can or grease pump case (1) and follower plate (2). NOTICE 1. C heck t hat a can or grease is in t he greas e pump case. If the rease level i s low, fill with greas e. 2. C heck t hat th ere is no leakage of grease betwee n the grease an or greas e pump case ( 1) and follower plate ( NOTIC Do no t remov e follower pla te (2). If follow er plate (2 ) is not u sed, pum p (3) will be unabl e to su ck up th e grease even i f there is still a lar ge quantit y of grease in the Both when using a grea se can and w hen not using a grease c an, use suitable follower Follower plate part No.

When using grease can 42C-S95-1740 When not using grease can 42C-S95-1730