Komatsu — PRECAUTIONS WHEN HANDLING AUTO-GREASING SYSTEM

. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM each end 3) Discharge the grease containing air (milky white in many cases) from the injector. If normal grease comes out, stop the grease pump. the grease pump. is not leaking.) NOTICE 6 - 5 1) One person rem oves plug (4) from one injector, t installed to the manifold end of ed from the main piping, remove n presses the auto-greasing switc p. 4) Tighten plug (4) of the injector to prevent the gre to see if the air has been bled by simply checking the pressure ga uge. Even if air is mixed he auto-grease system operates since the discharge pressure of t he grease pump is high.

asing system is working normall y, check that the grease pump is balanced and stopped in perating) time (60 seconds). 4. Method of bleeding air from pressure switch This wor performed by two p ersons. ion inspection cover (5) at the re 1) Open transmiss n removes pressure switch (7) fr here. 2) The other perso n presses the auto-greasing switc p. rease containing air (milky white 3) Discharge the g block (6). If normal grease comes 4) Install pressure switch (7) to block (6). (Check th at grease is 5. Method of bleeding This work shall be p 1) One person rem oves supply line pressure gauge tays there. 2) The other perso n presses the auto-greasing switc p.

rease containing air (milky white 3) Discharge the g block (6). If normal grease comes p. 4) Install pressure gauge (8) to block (6). (Check th If air is left in the circuit, t he grease pressure will not rise to the level or will take a long tim e to rise to the specified level, and t will n