. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM METHOD OF ADJUSTING DISCHARGE FROM INJECTOR screw stops (at the stopper), the discharge is minimized. One turn between the maximum and minimum positions change the discharge by 0.13 cc. After adjusting the discharge, be sure to tighten the lock nut. 6 - 11 1. I njector (SL1 1) The inje and it fee ds grease of the specified quantit y to the bearing. 2) To see if the injector work s normally, che ck the o peration of indica tor pin (1) on its h ead. If the inject or is normal, the pin is ret lost, the racted first. If the pin returns and it pump stops and is reset for the n the pressur ext greasing Adjust t he discharge fro ) on its head.
screw (3 1] To re duce the dischar ge, loosen lock and t urn the adjustment 2] If the adjustment scre w is returned by 1 0 turns from the tightened positi on (minimum d ischarg e, the discharge is maximized (1. 3 cc/st) adjusting the dis charge from the injector, be s ure hten lock nut (2). 4) Although the injector can be overhauled a nd repaired, replace it with a spare one, if possible, whe n it has any trou ble. n lock nut (2) and turn adjustment screw (3) to adjust the discharge of grease made each time.
Loose n lock nut (2) an d turn adjustmen t screw (3) t o adjust the discharge of grea se made each tim Discharge/time Turn clockwise to stopper 0.13 cc (Min) Turn counterclockwise by 10 tu from above position rns 1.30 cc (Max)