Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS Position (A): (OFF) Stop Position (B): (INT) Intermittent wiper Position (C): Low-speed wiper Position (D): High-speed wiper REAR WIPER SWITCH When lever (E) of this switch (17) is turned, the rear wiper will move. ROOM LAMP SWITCH This switch (19) is used to light up the room lamp. Position (A): OFF Position (B): Lights up when cab door is opened Position (C): ON 3 - 32 FRONT WIPER SWITCH When rotary switch (E) o f this switch (16) is turned, the front wiper will move. If push button (F) is press ed, washer liquid will be sprayed ou t onto the front glass while the button is being pressed.

It is possible to check th e position of the switch in display w indow (G). Position (A): Washer liqu id is sprayed out erated Position (B): OFF Position (C): Wiper is op Position (D): Washer liqu id is sprayed out, wiper is operate CIGARETTE LIGHTER ettes. ) is pushed in, it will return to its original This is used to light cigar After cigarette lighter (18 riginal position after a few seco cigarette. nds, then you may pull it out and light a a REMARK The room lamp lights up even when the starting switch is at the OFF position, so whe sure to set the switch n leaving the operator's compartme nt, be to position (A) (OFF) or position (B ).

When operating with the cab door fully opened, set this switch to position (A) (OFF).