. OPERATION EXPLANATION OF COMPONENTS PARKING BRAKE SWITCH WARNING applied, and the parking brake The parking brake is released. it is 3 - 33 Always apply the parking brake when lea ving the machine or when parking it. Even if the pa rking brake switch is turned ON, there is danger until t he parking brake pilot lamp lights u p, so keep the brake pedal depressed. NOTICE Never use the parking brake switch to apply the brakes when tra veling, except in an emergency. Ap ply the parking brake only after the m achine has stopped.
If the park ing brake has been used as an emergency brake whe n traveling at high speed (near the maximum speed), contact your Kom atsu distributor to have the parking brake checked for any abnormality. Use this sw itch (20) to apply the par Position (A) : ON The parking brake is a pilot lamp lights up. : OFF Position (B) REMARK ectional selector switch is placed at F or R when the parking brake is still applied, the central warning hes and the alarm buzzer sounds.
If the dir ectional selector switch i s placed at F or R whe lamp flas hes and the alarm buzze If the ma chine is left with the engin e stopped but the parki ng brake switch is at the "OFF" p osition, or if the starting switch is is turned position. "OFF" p at the "OFF" position and the parking brake swit ch is set to the "OFF" position, w hen the starting switch to the "ON" position, th e parking brake is app lied even if the parking brake switch is at the "OFF" If this happens, after star ting the engine, turn th e parking brake switch to the "O N" position, then to the osition to release the par king brake.
If the par king brake is still applied, the machine will not mo ve off even if the directional sele ctor switch is operated. ENGINE LOW IDLING SELECTOR SW ITCH Use this sw two stages. itch (21) to switch the engine low idling speed be Press the p once, the pi ush button to turn ON or OFF. If the switch is pr lot lamp lights up and the system is switched O is pressed again, the pilot lamp goes out and the syst FF. switched O OFF: This s ets the engine low idling speed to approx. 650 r This is waitin used for normal operatio ns at low idling, such as g for dump trucks. ON: The en gine low idling speed is s et to approx. 850 rpm.
This is the cyc used on busy jobsites w here it is necessary to r le time.