. OPERATION OPERATION WARMING UP OPERATIONS 3. Check for abnormal exhaust gas color, noise, or vibration. problem is found, contact your Komatsu distributor. 3 - 98 NOTICE Do not perform opera hydraulic oil is at a lo tions or suddenly operate the levers when the w temperature. Always perform the warming-up operation until the hyd range. This will help e Do not suddenly accel operating temperature raulic oil temperature monitor displays the green xtend the machine life. erate the engine before the machine reaches full . Do not run the engine will cause oil leaks fro at low or high idle for more than 2 m the turbocharger oil supply pip 0 minutes. This ing.
If it is necessary to ru n the engine at idling, apply a lo ad from time to time or run the engine at a mid-range speed. caution lamp (3) flashes or the buzzer sounds engine and check for the cause. If engine oil pressure intermittently, stop the engine and check for the cause. 1. Turn fuel control d ial (1) to the center position b etween LOW IDLE (MIN) and medium speed for HIGH IDLE (MAX) and run t he engine at . about 5 minutes with no load 2. After warm-up is c ompleted, check gauges and caution lamps for proper operatio Continue to run t coolant temperatu range (B). (A): White range (B): Green range (C): Red range n. If any problem is found, re pair it. until engine If any