. OPERATION TROUBLESHOOTING METHOD OF TOWING MACHINE WARNING If the machine sinks in mud and cannot get out under its own towing. range for the 3 - 145 9. Push in the kn ob of priming pump (2) and tighte 10. Turn the key i n the starting switch to t he START position and When doing th is, do not crank the star ting motor continuously for more than 20 secon ds. If the engine does not start, wait for at least 2 minutes, then try again. Perform this operation a maximum 11. If the engine d oes not start, repeat th e operation from St ep 1. Be sure to use a wire rope sufficiently stron g for the tow ing weig When using the t owing hook, be sure to use a shackle.
Set the wire rope level and align it with the t rack frame. Tow the machine power, or if being used to tow a heavy o bject, fit th e wire t o the towing hook as sh own in the diagram on t he right, or in the ca se of when NOTICE towing hook: 367,750 N (37,500 kg) Permissible load for towing hook: 367,750 N (3 Always carry out to permissible load. wing operations within the specified