. OPERATION TROUBLESHOOTING 3 - 148 DISCONNECTING THE BOOSTER CABLE After the engine has started, disconnect th e booste r cables i n th e reverse of the order i n which the y were connected. 1. Remove the clip of booster cable (B) from engine block (E) on the problem machine. 2. Remove th e clip o f booster he negative (-) terminal of battery (D) on the normal machine. 3. Remove th e clip o f booster cable ( A) from t he terminal of battery (D) on the normal machine. 4. Remove th e clip o f booster cable ( A) from t he terminal of battery (C) on the problem machine