. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE NOTICE 4 - 28 Whe n inserting the eleme nt, if the rubber at t he tip i s swollen or t he outer element is not pushed in straight, and cover (3) is a ssembled by force to hook (2), there is dange r that the hook an cleane damaged, so be careful w 8. I nsta ll cover (3) as 1) A lign cover (3) with the element 2) H ook the tip of hook (2) t o the leaner body a nd lock it in positi 3) W hen locking h ooks (2) in positi on, apply th e hooks in turn n opposite sid es (top, bottom, l eft, right) in the sa me way s when tighte 4) W hen cover ( arance etween the air cleaner body an d cove r (3) i s not to o large.
it is too large, install again. 9. After replacing the element, press t he dus t indicator bu tton to eset The yellow piston will return to its or iginal